碳性7号AAA无铅环保干电池高容量A品电池批发定做

• • 产品信息
  • 名称：高能新光gaoneng max牌®碳性无铅环保七号干电池  
  • 型号：aaa  品牌： gaoneng max 
  • 货号： gncb7101 gncb7102 gncb7103
  •           gncb7104 gncb7105
  • 颜色： 黑+绿+黄  电压：1.5v 
  • 装箱数：2400pcs/箱
• 注意事项：防潮防晒、禁止短路、禁止儿童玩耍。
• 产品说明：本产品是深圳市高能新光电池有限公司系列电池产品之一，各项检测证书齐全，支持外观定制定做，免费样品测试测评，欢迎来电来邮洽谈。

• 电话：0755-29660078 传真：0755-29660987
• 咨询：
• 订购：店内客服旺旺
• 企业  邮@qq.com

 若您需对放分加强、贴牌定制，敬请点击此处跳转。

定制说明：一、可定制本电池放分时间      放分时间，指本电池理论连续放电时间（负载3.9欧姆的电阻，从初始电压连续放电到0.9v所用的时间），反映出本电池的容量大小，目前，此款碳性七号干电池我厂支持放分时间Zui低可做到20分钟，Zui高可做到45分钟，放分时间越长，电池越重，工艺越难，成本也就越高，各位采购商可根据自己的实际需求进行选择定制。二、可定制外观与标签      如果您需要定制此电池的外观，或者说需要贴上您所要求的品牌标签，我工厂支持此种代工贴牌加工模式，但需要注意以下几点：（一）您需要首先选择好哪个级别放分时间的电芯；（二）您需要提供定制电池标签设计源文件（如果暂时没有现成图片，我厂提供免费设计服务）

（三）您需要提供定制商标品牌的《商标注册证书》以及该授权书，或定制商标为无所有权的商标，则无需授权，也无需出具《商标注册证书》。

（四）您需要支付一定金额的开模费（单款2000元/款），当然，如果您的一次性订单量达20万节及以上，我厂免收开模费，如果一次性订单达不到20万节，也没关系，当您的累计订单量达到20万节后我们全额退还您所付的开模费；

（五）您需要在下订单之时支付一定比例订单定金，原因就不用过多说明，这是您的定制款，如果您不先支付定金，做出来如果您不予购买，我厂将受到极大损失；

三、可定制热缩、卡装、组合

（一）可定制热缩数量，可选单粒缩、两粒缩、三粒缩、四粒缩、六粒缩等；

（二）可定制卡装，可选单节卡、两节卡、三节卡、四节卡、五节卡、十节卡等；

（三）可定制组合，如串联、并联、包pvc、焊接等工艺。

具体各类型加工电池相关事项敬请点击本店铺左侧旺旺客服进行咨询，谢谢！

special for custom description:
a customizable points of the battery discharge time
      put the divided time, means the battery discharge time continuum (3.9 ohm resistor load from the initial voltage continuous discharge to 0.9v elapsed time), reflecting the size of the battery capacity, at present, this section aaa carbon battery factory support discharge divided time minimum 35 minutes can be done, can be done up to 100 minutes, the longer the release time points, the heavier the battery, the more difficult the process, the higher the cost, you buyers can choose to customize according to their actual needs .
second, you can customize the appearance and labels
      if you need to customize the appearance of the battery, or you need to paste labels from re, our factory support this oem oem mode, but need to pay attention to the following points:
(a) you need to choose a good level at which a discharge between the wick;
(b) you need to provide custom battery label design source files (if there is no ready-made picture temporarily, i plant to provide free design service) 

(c) you need to provide customized brand's trademark "trademark registration certificate", power of attorney, and stamped with the company seal issued by the attorney trademark ownership; no ownership or custom trademark trademark, you do not need authorization, and without issue "trademark registration certificates . " 

(d) you need to pay a custom mold fee, of course, if your one-time orders amounted to 200,000 and more, our plant free of mold fee, if one-time orders of less than 200,000, it does not matter, when your cumulative order volume reached 200,000 holiday we paid a full refund of your mold fee; 

(v) you need to pay a certain percentage of the time deposit order in the next order, the reasons do not explain too much, this is your custom models, if you do not first pay a deposit, do not buy it if you are, i plant will be a great loss; 

third, can be customized heat shrink, card installed, the combination of 

(a) can be customized shrink the number of menu tablets may shrink, shrink two, three shrink, shrink four, six shrink and the like; 

(b) customizable card installed, the optional block card, two cards, three cards, four cards, five cards, ten day cards; 

(c) can be customized combinations, such as serial, parallel, package pvc, welding and other technology. 

specific processing of various types of battery-related matters please click on the left side of the shop want service for consultation, thank you!